Hand Tools
Student Use in Artisan Shop
SawStop 10” Industrial Cabinet Table Saw ICS51230
*One for Cutting Wood, One for Cutting Plastics*
**Does Not Cut Conductive Materials**
Basic Specifications
Horsepower: 5HP
Rip Capacity: 52”
Blade plate thickness: 0.078″ (2mm)
Max. depth of cut, blade at 0º: 3 1/8″
Max. depth of cut, blade at 45º: 2 1/4″
Max. rip, right of blade: 52 1/2″
Max. rip, left of blade: 12 1/2″
Wilton 6” Belt Sander 4210
Basic Specifications
HP: 1
Disc Dia. (In.): 10
Disc Speed (RPM): 2100
Belt Size (In.): 6 x 48
Disc Table Size (In.): 7-3/8 x 14-¾
Table Work Surface (In.): 6 x 10-½
Disc Table Tilt-In Angle (Deg.): 20
Disc Table Tilt-Out Angle (Deg.): 45
Belt Table Tilt Angle (Deg.): 0 to 90 Degrees
Baldor 2” Belt Sander 2048-1510
Basic Specifications
80 Grit Available
1-1/2 HP motor
Frequency: 60.00 Hz
Speed: 3450 rpm
KALAMAZOO 1″ BELT SANDER 486-021
Basic Specifications
220 Grit Available
1/3 HP 1Ph (115v) motor.
1 PH, 1725 RPM.
1″ x 42″ belt.
4″ drive wheel.
Steel tilt and removable work table – vertical sander only. Table size: 3″ W x 3″ D. Table can tilt approximate 20 degrees up and 45 degrees down.
Steel adjustable plate. Platen size: 1-7/8″ W x 5-7/8″ H.
Bernina B215 Sewing Machine
Basic Specifications
Hook system: CB
Maximum sewing speed (stitches per minute): 900
LED sewing lights: LED
Needle positions: 9
Maximum stitch width: 5.5
Sewing in each needle position
Semi-automatic needle threader
Manual thread cutter: 3
Needle stop up/down
Equipment Requiring Training
LNS Plastic Injection Machine 150a
Basic Specifications
Shot Capacity: 1.1 CU In (8 Gram PS)
Max Temperature: 500 Deg F. (280 Deg C.)
Suitable Materials: PP, PE, PS, ABS, TPE, PMMA, TPU, TPV, EVA
Unsuitable Materials: PC, PET, PVC, Nylon
Centroform EZForm sv 1217
Basic Specifications
Unit measures : 28 ” high x 25 ” long x 16 ” wide
Plastic sheet size : 15 1/4 ” x 20 1/4 “
Forming area : 12 ” x 17 “
Heater : 1500 Watts
Max. depth of draw 7 inches depending on mold Geometry
Vacuum Ports : 1 1/2 ” and and 3/8 “
Megaplot Foam Cutter (MW2500)
Basic Specifications
Cutting Wire Length: 250cm
Working Length: 240cm
Working Height: 123cm
Max. Transit Speed: 200 cm/min
Shopbot Gantry Router 4 Ft. X 8 Ft. (PRSalpha 96-48)
Basic Specifications
Can Cut: Wood, Plastic, Aluminum
Step Resolution: .0004”.
Positional accuracy: +/- .002”.
Cutting Area: 48” x 96”
XY Move Speed (with full cutting force): Variable, max. 720”/min.
Z Move Speed (with full cutting force): Variable, max. 360”/min.
XY Positioning Speed: Variable, max. 1800”/min.
Z Positioning Speed: Variable, max. 900”/min.
Linear Cutting Force: 150 lbs.
Available Upon Request
Powermatic 6” Jointer 54A
*In Backroom ask Technician for Use*
Basic Specifications
Motor Power: 1 Hp
Cuts Per Minute: 18,000
Cutterhead Diameter: 2-½ in
Cutterhead Speed: 6000 rpm
Cutting Capacity (W x D): 6 x ½ in
Powermatic Planer 209HH-3
*In Backroom ask Technician for Use*
Basic Specifications
Maximum Depth of Cut: 3/32 in
Maximum Full Width Depth of Cut: 3/32 in
Maximum Planing Thickness: 8 in
Maximum Planing Width: 20 in
Minimum Planing Length: 6-¾ in
Motor Power: 5 Hp
Cuts Per Minute: 20,000
Cutterhead Diameter: 3-3/16 in
Cutterhead Speed: 5000.0000 rpm
Powermatic 22”/44” Drum Sander P42244
*In Backroom ask Technician for Use*
Basic Specifications
Drum Diameter: 5 in
Drum Length: 22 in
Drum Speed: 1720 rpm
