Skip to primary navigation
Skip to main content
Skip to footer

Fischer Engineering Design Center

College of Engineering

Fischer Engineering Design Center

Home
About
Membership
- Badge System
Facility
Popup Courses
Services
Calendar
FAQ
Contact Us
- Consultation Request

Basic Hand Tools

You are here: Home / Popup Courses / Fabrication / Basic Hand Tools

Basic Hand Tools

Training Description

Learn to use basic tools such as handsaws, screwdrivers, wrenches and more.

Prerequisite(s):

N/A

Download the Basic Hand Tools PowerPoint document here

Basic Hand Tools Quiz

Basic Hand Tools POPUP: You must score 90% minimum to pass. If you have technical difficulties or issues please contact info-FEDC@tamu.edu.

Step 1 of 2

50%

UIN*
Email

Question 1*
It's best to hold a ripsaw at an angle of _____ and a crosscut saw at an angle of _____.
- 30 and 60 degrees
- 50 and 60 degrees
- 60 and 45 degrees
- 60 and 30 degrees
Question 2*
If you are unsure of what type of screwdriver to use, then you should:
- Hammer the screw in
- Ask a technician for help
- Try out all the different kinds and see which works
- Find a different screw
Question 3*
Which of the following is the intended purpose of screwdrivers?
- Prying apart boards
- Driving or removing screws
- Chiseling wood or stone
- Scraping adhesive from metal
Question 4*
Cheater bars:
- Are acceptable for stuck on bolts
- Require shop staff approval
- Are not allowed
- A and B
Question 5*
Torque wrenches may be used in the same manner as a conventional wrench.
- True
- False
Question 6*
The best way to use a wrench to loosen a bolt is to:
- Pull the wrench toward the operator who is in a braced stance until the bolt is loosened
- Push the wrench away from the operator who is in a braced stance until the bolt is loosened
- Hang off the wrench until the bolt is loosened
- Tie a rope to the end of wrench and pull until the bolt is loosened
Question 7*
A combination wrench is best described as
- Having a box end and open end on opposite sides of the same wrench
- Having different sized box ends
- Having different sized open ends
- Having adjustable ends on opposite sides of the same wrench
Question 8*
Pipe wrenches:
- Can be used on any fastener or pipe fitting that will fit in its jaws
- Should only be used for pipe fittings
- Will badly mar finishes because the jaws bite into the holding surface
- B and C
Question 9*
A Socket (hinge handle) wrench is also called:
- A cheater bar
- A breaker bar
- A ratchet
- A loosening bar
Question 10*
A Hex-Key Wrench is also called
- A star wrench
- A poly wrench
- An Allen wrench
- A hexagon driver

Differential tuition pays for enhancements to the learning experience of undergraduate students in engineering. These enhancements include extra sections of overfull courses, new computers and equipment, and even extra lecturers to teach classes. Learn more about differential tuition here.

Footer

Learn More

College of Engineering

Search this website

Copyright © 2023 · Texas A&M University College of Engineering · All Rights Reserved

State of Texas • Texas Homeland Security • Open Records • Risk, Fraud & Misconduct Hotline • Statewide Search • Texas CREWS • Site Links & Policies • Environmental Health, Safety & Security • Employment