Electronics Bench
Oscilliscopes
Keysight Infiniivision MSOx6004A
Basic Specifications
1– 6 GHz
4 analog plus 16 digital channels
Easily view and isolate signals on the 12.1-in capacitive multi-touch screen with Zone triggering and 450,000 wfms/s update rate
Make more precise measurements with 115 Vrms noise floor at 1 mV/div (1 GHz)
Get performance measurements anywhere with the portable 6-in deep size
Quickly see analysis details with standard histogram and color grade
View signal integrity with jitter and eye diagram analysis options
Expand capabilities with full upgradability
Keysight Infiniivision MSOX3024T
Basic Specifications
200 MHz
4 analog plus 16 digital channels
Easily view and analyze your signals with on the large 8.5-inch capacitive touch screen
Isolate signals in seconds with exclusive zone touch triggering
See more signal detail with the 1,000,000 wfms/s update rate
Capture more data with up to 4 Mpts memory
Expand your measurement capabilities with full upgradability: Add bandwidth, 20 MHz arbitrary waveform generator, 3-digit voltmeter, serial trigger, and analysis & mask testing at any time
Keysight EDUX1002G
Basic Specifications
50 MHz
See more signal detail with 50,000 wfms/sec update rate
Make professional measurements, including math, FFT, analog bus, and protocol triggering/decode
Get more instrument integration with built-in 20 MHz wavegen and frequency response analysis
Quickly learn how to use; oscilloscopes have built-in help and training signals
Multimeter
Keysight 34461A
Basic Specifications
Histogram, bar and trend charts on 4.3-inch color graphical display ease monitoring and speed up statistical analysis.
Measure with confidence, with 35 ppm basic DCV accuracy.
Test low power devices with low DC current measurement range from 100 µA to 10 A.
Flexibly automate measurements over USB or LAN/LXI core interface.
Migrate with confidence from legacy model 34401A.
A BenchVue software license BV0001B is now included with your instrument
Function Generator
Keysight 81160A
Basic Specifications
Frequency range – 1 µHz to 330 MHz (pulse)
Frequency range – 1 µHz to 500 MHz (sine)
Channels – 1 or 2, differential outputs
Output amplitude – 50 Ω into 50 Ω, 50 Ω into open, 50 mVPP to 5 VPP, 100 mVPP to 10 VPP
Modulation types – AM, FM, PM, FSK, PWM external and internal, double pulse
Transition times – 1 ns to 1000 s (10% to 90%)
Output impedance – 50 Ω
Sample rate – 14-bit, 2.5 GSa/s arbitrary waveform
Noise repetition rate – 20 days
Programming interfaces- LAN, SCPI-1997, IEEE 488.2 (GPIB), USB
Supported drivers and software applications – Keysight VEE, IVI-COM, Keysight Bench Link Waveform Builder Pro, NI Labview, Matlab
Waveform Generator
Ailgent 33220A
Basic Specifications
Quick test setup and execution
Create multiple scan lists
Execute different events based on predefined limits
Use advanced math formulas
Collect, monitor and manage data
Present data on a single or multiple graphs
Export data to other applications for presentation and analysis
BenchVue Enabled. Control your DMM from your PC to view and capture your data easily.
Keysight 33500B
Basic Specifications
Up to 30 MHz sine and pulse
Jitter: < 40 ps
THD: < 0.04%
Amplitude ranges: 1 mVpp up to 10 Vpp
250 MSa/s sampling rate
16-bit amplitude resolution
1 MSa/channel memory, 16 MSa optional
DC Power Supply
Keysight E36311A
Basic Specifications
GPIB SCPI – 1999, IEEE 488.2 compliant interface
LXI compliance Class C
USB 2.0 Requires Keysight IO Library version 17.2.208 and up
10/100 LAN Requires Keysight IO Library version 17.2.208 and up
BK Precision Model 1791
Basic Specifications
Red and black test lead (120 cm) – Max Current 25A
Spade lug adapters (6 & 4 mm) – Max Current 36A
Standard alligator clips – Max Current 3A
4 mmBanana plug adapters – Max Current 36A
Large insulated alligator clips – Max Current 36A
Red and black sense leads (10 cm) – Max Current 3A
AC Power Supply
Keysight AC6803B
Basic Specifications
Rated voltage range 1 to 155 Vrms/2 to 310 Vrms
Voltage setting accuracy 1 0.35% of full scale
Output phases Single
Maximum rms current 2 5 A/2.5 A 10 A/5 A 20 A/10 A 40 A/20 A
Load power factor capability 0 to 1 (leading or lagging)
Maximum power 500 VA 1 kVA 2 kVA 4 kVA
Frequency setting range 40 to 500 Hz
Frequency accuracy ± 0.02%
Logic Analyzer
Keysight 16862A
Basic Specifications
Logic analyzer configuration
68 channels, 350 MHz state, 12.5 GHz timing zoom, 2.5 GHz timing, 2 Mb depth standard
15-inch (38.1 cm) color, touch-screen display for viewing and quickly navigating large numbers of signals and buses
built-in removable SSD drive, USB 3.0 ports, and LAN for fast data transfer and storage of large amounts of data
1.4 GHz trigger sequencer to ensure high-speed events are captured
Timing analysis (asynchronous sampling)
up to 2.5 GHz/5.0 GHz/10 GHz (full-/half-/quarter-channel) timing for capturing signal activity at high resolution
up to 128 Mb/256 Mb/512 Mb (full-/half-/quarter-channel) deep memory for identifying the root cause of a problem and symptom widely separated in time
12.5 GHz (80 ps) timing zoom with 256K memory depth for analysis of the trigger event with high resolution
Power Analyzer
Keysight N6705CX2
Basic Specifications
Ammeter accuracy: Up to 0.025% + 8 nA; up to 18 bits
Arbitrary waveform generator function: Bandwidth up to 100 kHz, output power up to 500 W
Data logger function: Measurement interval from 20 µs to 60 seconds, with a maximum of 500 M readings per second
Scope function: Digitizes voltage and current up to 200 kHz, 512 kpts; up to 18 bits
Voltmeter accuracy: Up to 0.025% + 50 µV; up to 18 bits
RF Generator
Keysight N9310A
Basic Specifications
Frequency:9 kHz to 3 GHz
Frequency Options:3 GHz
Frequency Switching (Typical):10 ms
Harmonics @1 GHz:-30 dBc
Non-Harmonics @1 GHz:-50 dBc
Output Power @1 GHz:+13 dBm
Phase Noise @1 GHz (20 kHz offset):-95 dBc/Hz
Spectrum Analyzer
Hewlett Packard ESA L 1500A
Basic Specifications
Frequency
Frequency Range
50 ohms: 9 kHz to 1.5 GHz
75 ohms (Option 1DP): 1 MHz to 1.5 GHz
Frequency Reference
Aging: ± 2 x 10 –6 /year
Settability: ± 0.5 x 10 –6
Temperature Stability: ± 5 x 10
Microscope
O.C. White PROZoom PZ-6.5
Basic Specifications
Exclusive Detented Zoom Stops
Super-Wide (28mm) 10x Eyepieces
Standard Range 5-65x (up to 390x with optional parts, see the magnification chart below)
Articulating arm assembly, easy 360° main body rotation
190mm working distance
0.5x auxiliary objective lens
±6 Diopter adjustable eyepieces to correct individual eyesight variations
45° eyetube inclination
CAD Station
Desktop
lenovo Thinkstation P720
Basic Specifications
Processor – Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz
Operating System – Windows 10 Enterprise 64
Power Supply – 900W @ 92% efficient
Graphics – NVIDIA® Quadro® GV100 32GB
Memory – 32 GB DIMM capacity
Software Installed
Altium, Ansys, Arduino software, AutoCAD, Inventor, Fusion360,
MeshMixer, Blender, PTC – Creo (Parametric), MatLab, NI LabVIEW,
NI MultiSim Pro, NI Ultiboard Pro, NI myDAQ Software, R/R Studio,
Anaconda/PyCharm, MS Visual Studio, SolidWorks, Bootstrap,
Microsoft Office 2019, Microsoft Project 2019, Microsoft Visio 2019
GIMP, SketchUp
Monitor
Samsung C49HG90DMN
Basic Specifications
Screen Size (Inch) – 49″
Display Type – VA
Curvature – 1800R
Resolution – 3840 X 1080
Aspect Ratio – 32:9
Brightness – 350cd/m2 (Typ.), 250cd/m2 (Min.)
Static Contrast Ratio – 3000:1(Typ),2400:1(Min)
Dynamic Contrast Ratio – Yes
Viewing Angle (Horizontal/Vertical) – 178°(H)/178°(V)
HDR – Yes
Response Time – 1ms (MPRT)
3D Scanner Station
Scale
Measuretek PS-103-200
Scanner
Matter and Form MFS1V2 3D Scanner
Basic Specifications
Scan Accuracy – ± 0.1mm
Maximum Object Size:
Height: 25 cm (9.8 in)
Diameter: 18 cm (7.0 in)
Maximum Object Weight – 3.0kg (6.6 lbs)
Optics – HD CMOS sensor
Construction Area
Equipment Checkout
Matter and Form MFS1V2 3D Scanner
Basic Specifications
Scan Accuracy – ± 0.1mm
Maximum Object Size:
Height: 25 cm (9.8 in)
Diameter: 18 cm (7.0 in)
Maximum Object Weight – 3.0kg (6.6 lbs)
Optics – HD CMOS sensor
Matter and Form MFS1V2 3D Scanner
Basic Specifications
Scan Accuracy – ± 0.1mm
Maximum Object Size:
Height: 25 cm (9.8 in)
Diameter: 18 cm (7.0 in)
Maximum Object Weight – 3.0kg (6.6 lbs)
Optics – HD CMOS sensor